HOW MUCH STUFF CAN YOU STORE IN A 6 INCH SPACE?

I am pretty sure you are getting tired of me posting on working on the studio as I am pretty sure I am tired of working ON the studio instead of IN the studio.  But, there is a huge beaming light at the end of the tunnel and I can see it.  I am reaching for it.  I know the place where I create will continue to evolve and change as need arises, in these final stages of getting the last furniture pieces in place and having a place for everything, only the things I love and want to create with, I feel like I have accomplished a huge goal.

 Honestly, it feels just a tad bit scary to be at a done place, the real work will now have to begin.  The thought is both daunting and exhilarating because it means another step towards my goals.  Little fears trickle in...What if I can't create anything except a pretty functional room?  What if I fail to move forward?  What if?  What if?  What if?...such a nasty hiss!  The Pollyanna side of me pushes the Doubting Thomas aside and whispers...What if you succeed?  What if you glad beyond glad that you took the time, effort, and energy to create a tailor made functional for you creative space?  What if you create your masterpiece?  What if?  What if?  What if?...whispered with such hope.

So it is with Pollyanna positivity that I press on and with any luck I will actually have the job complete this weekend.  I know, I know, you have heard this before and if I could have foreseen the future I would not have said that and it may not happen this weekend either but I will give it my best try.  (Just in case you are wondering I am waiting on Handy Hubby to finish up some welding and that is the hold up.)  While I am a lady in waiting for my knight in shining welder shield to come to my rescue I have been working on a tiny overflow storage area, behind the door storage.  You might not think you can do much with a mere 6 inch space but I will prove that you can!

I began with two old wooden crates that I picked up at a flea market for a mere $3.00 each...

I had Handy Hubby cut them down into equal sections.  I glued and clamped the sections together and Handy Hubby added a 1/8 inch wood backing to the whole thing.  Once dry and secure I used old book pages to cover the back of the unit.  We then attached it to the wall by using screws into the wall studs...

I purchased a wooden thread holder at a flea market and cut it apart into three sections, attaching one section in each of the three upper boxes...

I also found some small tension rods at a flea market.  I spray painted those with brown spray paint and installed them for extra ribbon storage...

Lastly I found glass jars that fit the shelving on sale at Hobby Lobby and filled them with ribbon scraps sorted out into like color families...

(There's room for two more jars but they are out of stock.  I will purchase those with my sale price rain check as soon as they get more in.)

On top are some free boxes that were given to me.  These small boxes store craft feathers...

I glued a strip of on old dictionary page around them and stamped a feather on each one.  I used colored pencils to color in the feathers to match what is in each box.

I consider this over flow and room to grow storage, after all, I have other ribbon storage here...

And here...

And here... 

And more thread storage here...

 I was thinking I might add some hooks to the sides where I could hang things from that too, maybe like extra shipping tags or who knows what.  I even gave pause to adding decorated tin cans to the sides to store pencils, pens, or paint brushes and I still might!

You could fill a whole unit like this just with threads, with rows of ribbons, or with jars of supplies.  

It is amazing what you can actually store in a 6 inch space!

Here is a sneak peek at that very last furniture piece...

So, I guess you know what I will be up to this weekend, got and great plans?

A COMPLETED PIECE OF STUDIO STORAGE...

 It has turned out to be a very happy marriage of a tiny child sized chest of drawers, tiered table, and button cubby for new studio storage.  It was a tight squeeze but there is just enough room for the door to open and close.

  Before...

 

During...

  

After...

 

I love the new chubby knobs I found on sale at Hobby Lobby...

Care for a peek into the drawers?  Old tattered linens for projects...

 
Embroidered linens, handkerchiefs, and colorful crochet...

 This drawer has some temporary bagged things that are waiting for their new home, once they are removed it will be room for supply growth...

Current sewing projects: pillows, purses, a window treatment, and a skirt...

The shelves provide a place to stack lots of pretty boxes to hold supplies...

 Topping off the trio is my button cubby full of little glass jars of assorted colorful buttons...
 
I made little lid covers to coordinate with the button collections inside.  I grouped these in like color families, wood, metal, and glass... 
 



This little jar is one of my favorites.  These are buttons from my mother's button box that I played with as a child.  I have marked them as keepsakes, fun to take out and look at but I will probably never use these on a project...
 
On top I stored some spools of fibers and an adorable pin cushion doll...

One tiny artsy project is displayed here, a fiber and paper cup and saucer that I made...

 

The final finishing touch will be to add some hooks the top sides of the button cubby box for hanging supplies on. 

With limited space think going vertical, floor to ceiling like with this project.  I waffled about adding the cubby on top because it took up the snippet of wall space but in the end this was the best place for it in the room.  I am tackling the behind the door storage and the final piece of furniture this weekend, I have been waiting on some things I ordered to come in to finish these projects and they arrived yesterday.

I hope your day is being filled with beautiful things!

Blessings,

Sandy

Coming Unglued, In a Good Way...(3 mini tutorials included)

"When you give someone a book, you don't give him just paper, ink, and glue. You give him the possibility of a whole new life."

~Christopher Morely~

I know you are going to be as tired of this project as I am before it is finished. I am about to come unglued, in a good way, as I am nearing the end of the gluing process on the second project, the trunk, for studio storage.

Here is the finished bookcase! The old book pages gave this project new life...The two were married (see previous posts here and here) and the yucky backs were primed and then papered with a variety of old book pages and sheet music. I thought I would show you a quick how~to of doing this as well as the process I am using to revamp the inside of the trunk.YOU WILL NEED:

*Wallpaper paste
*Sponge brush
*Old credit or gift card ~ to use as a smoothing tool
*Variety of old book pages that vary is size
*Old sheet music
*Paint brush
*Non~yellowing clear sealer

INSTRUCTIONS:

NOTE: If the surface you are covering is soiled you may want to prime it so that any stains will not bleed through your book pages once they are adhered.

*Lay book page face down on a protected surface, using sponge brush, brush a thin layer of glue over the whole page, making sure to get the edges.

*Place book page on surface and use old credit card or gift card to smooth out the paper, being careful no to put too much pressure or the paper will tear. You want to get out any air bubbles or wrinkles.

*Repeat this process with randomly placed pages mixed with sheet music until you cover your entire surface. Turn some pages sideways or upside down to get a more interesting look. You want to avoid to many straight edges lined up. If this occurs, just layer another page over the surface. You can even place some pages on an angle, there is no right or wrong way to do this. I even cut some pages in half and added them to the some of the edges.

*Allow to dry overnight

*Brush on a coat or two of non~yellowing clear sealer to protect your book pages, allowing to dry between applications.

Below are step~by~step progression photos of the process I used on my bookcase. I tend to do things the hard way, I didn't think of taking photos until I got the last shelf, yep, the one on the bottom. If the photo angles are a little strange or the lighting bad it is because I had to lay flat on my stomach on the floor to take them. Oh the things we will do in the name of blogging!This technique can also be used on flat surfaces, like a desk top. If you apply this to a surface that will be used a lot I recommend using a durable polyurethane of at least three coats. This could be a great idea for a child's bookcase as well, brightly colored storybook pages would make for fun fanciful storage. For a sewing room, why not use old pattern fronts? Why not substitute colorful scrapbook papers, magazine pages, old letters, or even a variety of vintage ephemera?

The trunk got gussied up with a few book pages on the exterior using the same process as described above.I wanted to restore the inside of the trunk as close to the original which was papered in a brown paper. The interior paper was so old, crumbling, and stinky that I stripped it out, all except the original little graphic, that I left in tact. After removing the paper, sanding, and priming the surface I chose to do another paper finish that resembles leather when completed.For this technique you will need the same basic supplies as in the previous project minus the book pages, instead, you will need a roll of brown wrapping paper, the kind you use to wrap and mail packages in.

Again, if your surface is stained, you will want to prime out your project or the stains will leach through your finish project. I primed all the interior surfaces not only due to stains but stink as well. I tried every remedy known to man and could not get the smell out of this trunk so I got a stain and odor blocking primer to treat the surface.

*To begin the project, tear the brown wrapping paper into pieces. You want a variety of sizes from a small, medium, to large range, the largest being no more than approx. 4 in. in size. Tear randomly not in straight pieces.

*Using the same gluing method as above, begin to randomly place the glued paper pieces on the surface of your project, over lapping the edges and smoothing out air bubbles as you go. You want to avoid any of the straight edges of the paper showing so always cover them up with a jagged edge overlapping them.

*Once your surface is covered, allow to dry overnight.

*Seal surface with one or two coats of sealer.

OPTIONAL: If you want a deep rich antique leather look, use and antiquing gel in a brown tone, found at most craft and hobby stores, before sealing. Apply the gel with a soft rag rubbing until you get the look you want. Allow to dry overnight before sealing. This technique looks fantastic on a wall or a tabletop for a leather looking surface.

Below are some photos of the steps in the process. If you see any shiny or white areas, this is the paste, I took these before it was dry.In the midst of all this trunk junk, my friend, Pam, stopped by and we headed to the kitchen to do some dying of tags, paper, lace and trims. We did up a big batch of grunge tags using QueenBe's recipe, found here. After we got tired of dunking tags, we started dipping papers and then moved on to trims, laces, and ribbons. Let me tell you, QueenBe's recipe works great for all of them and they smell so good!Then we invented our own recipe for making some pretty pink strawberry scented tags and trims. To make your own pretty pink strawberry scented tags and trims, you will need:

*Standard shipping tags ~ We used medium and small tags in a cream color, white will work too
*1 1/2 cups boiling water
*2 Moroccan Pomegranate Red tea bags ~ Celestial Seasonings is the brand we used
*6 drops red food coloring
*3 Tablespoons strawberry flavoring ~ found in the baking section of the grocery store
*Cookie cooling racks
*Shallow container ~ I use and old casserole dish
*Old Cookie sheet ~ be sure it is not rusty, if it is, cover it with aluminum foil
*250 degree preheated oven

TO MAKE TAGS:

*Pour boiling water into shallow dish and steep tea bags in boiling water for several minutes, stirring occasionally to distribute colored tea.

*Add food coloring and strawberry flavoring, stir.

*Place tags in liquid mixture and allow to soak for 20 seconds or so until they reach the desired depth of color of your choice.

*Remove tags from liquid and place on old baking pan in a single layer, make sure pan is not rusty or the rust will transfer to the tag and stain it.

*Place baking sheet in preheated oven and bake for 3 minutes, remove from oven, turn over tags, replace in oven for 3 more minutes. Tags are dry when they begin to curl. DO NOT LEAVE TAGS UNATTENDED!

*Cool tags on cookie cooling racks.

*Once completely dry and cool, store tags in a sealed container or zip storage bag until use. This will preserve the scent of the tag.

*Remove tags from storage and embellish any way you wish and enjoy!

*For trims, soak in liquid mixture until desired color is reached. Gently squeeze out excess liquid. Lay trim out on a flat surface covered with waxed paper and paper towels and allow to dry. I put some paper under some of mine instead of paper towels and it left the dye residue on the paper staining it, which will make a really cool background paper.

I am working on some other scented tag experiments, I'll let you know how they turn out. I am thinking peppermint for Christmas!

Well, I have not quite come unglued yet, I still have to tackle the inside of the trunk bottom before I can get to the old door project. Aren't the possibilities of a whole new life by the addition of a little paper and glue delicious? In the meantime, I hope you all have a very wonderful weekend. In the next post we will play the guessing game I mentioned and yes, there will be prizes!

Blessings,
Sandy